Custom Fabric Covered Light Switch Plate Covers/Plates

I decided a while back to make some light switch covers. Then as I got further into them, it seemed like a good thing to share with others. This is my first set:

It was not my best work, but I got the process down after a few more. Here are some other examples of covers I made:

Regardless of the size of the cover or the shape of the switch itself, you can cover it with fabric using ModPodge or a water/glue mixture and a little imagination. I used an Exacto knife, but you can use scissors or whatever you have for cutting. The basic back instructions look like this:

Want to make some of your own? Comprehensive step-by-step, photographed instructions can be found here. (Updated March 24, 2013.) Now go gather up some small pieces of fabric, some new or old light switch covers, and get started. Way easy.

A couple of notes:

• I painted the screws for each cover to match the fabric. I picked up just a basic set of paints, stuck the screws in a Styrofoam ball to hold them steady, and then painted the heads.
• For light switches with the round fader, cut a circle a little bit larger than the circle itself and turn the fabric under on the back, using the same glue/ModPodge process.
• You do need to let these dry for a day or so before using them.
• They're great for selling on line or at craft shows too using trendy fabrics, holiday fabrics, hand dyed fabrics - the list is endless.

I'm sure there are other ways to do these, but it's the best way I could figure out and now you've got the instructions too.