New Tutorial - Patchwork tote bag, lined, with a pocket!

I recently made a bag for a friend and decided to get to stepping with a tutorial. It is also listed on the Tutorial page linked to the right. In fact, it's easier to read the tutorial linked from the tutorial page as the photos can be side by side and I'm not limited to size of the width. On the blog here, it's single photos one after the other :)

PATCHWORK TOTE BAG TUTORIAL

I've made 100s of tote bags in my years of sewing. Sometimes they're made as gifts, as was this one in our example. This bag was created with patchwork triangles, so there will be some "how to" for the triangles themselves. Otherwise, the instructions can be use for any tote bag. This one happens to be lined. You don't have to do this. Just leave that part of the tutorial out.

Not sure if this is the front or the back. You decide. I'll show you how to cut and stitch triangles to make this or any design of your choice. This bag is about 17" x 17".

And if that's the front, this is the back, or vice versa. I made the two sides just a little bit differently. Both include a bit of the Flying Geese pattern and a simple triangle to triangle pattern.

This is a nice shot of the inside which includes a full size lining and a recycled denim pocket that has been embellished with a square of the patterned fabric used in the patchwork.

First I decided that I was going to use denim in some way, so grabbed a small pile of dissected jeans.

Next came a decision to make the base square 3" and start rotary cutting those squares. You can mark and use scissors if you like.

I have a lot of brown fabrics and this one caught my eye for a tote bag project. So 3" squares were cut.

This leaves us with a couple of nice piles of squares to make our triangle designs.

Bear with me. We're about to sew and cut triangles using squares. Place a denim square face up on your sewing surface.

Then take a square of your print and place it face down on the up facing denim square.

I love triangles, but hate sewing on the bias edge of anything, so we're trying something new. Draw a line from corner to corner on the diagonal of your square. The dotted lines show where we are going to stitch, approximately 1/4" from the center line.

Stitch from corner to corner with an approximately 1/4" seamline.

Then stitch from corner to corner on the other side of your center line, again using an approximately 1/4" seam allowance.

Next, cut along your center line that you had drawn. You now have two triangles sewn to two other triangles. So much easier than bias seams!

Turn one of your new sewn squares over, finger press, and look at what you've done. Pretty cool, huh?

Press the seams open with your trusty iron.

Break time! Grab your lining fabric and press it if needed. Set this aside for now.

Keep sewing triangles into squares using the method I showed you above or one of your own.

Play with the squares...

...twist and turn them...

....to find a design you like.

I chose a simple design and decided to embellish one side with a strip of Flying Geese. You find a design you like and go with it.

At this point, I estimated 6x6 squares, or 36 for each side. I stitched 6 rows of 4 with the triangle design.

I knew I would need 6 of the Flying Geese units....

....but played design before I started to sew.

Sew 2 triangle units together as shown. Each one of these blocks will be part of the Flying Geese design

After sewing the units together, you can play iwth placement again.

Now sew each of the Flying Geese units together, line that column up with the rows of triangle units, match seams, and stitch.

Press what is now one of the bag pieces! You don't have to measure it, but this gives you an idea of where you are size-wise. I wasn't happy with the size and wanted it a bit bigger.

I used my 2" roll of denim strips to make an edge for the bag. When I am cutting denim for any project, I cut 2" strips to add to my roll. It's always there waiting. It is not bias cut, so unable to be used for binding, but it's pretty versatile for other things.

The edge rows for the bag are nothing special, but do take the recycled denim theme to another level as well as enlarging the bag.

Time to make the handles for your bag. Using another stack of 3" squares, stitch together an approximate 36" strip.

Press the seams open on your strip.

Fold your strip in half wrong sides together, matching seams, and begin finger pressing it to get the fold started.

Use your iron to press the folded strip from end to end.

Your pressed strip.

Back at the sewing machine, open your folded strip and begin folding the edges toward the center, wrong sides facing each other.

Fold the other side to the center.

Now fold this piece in half.

Stitch down the open edge of your strip close to the edge.

Stitch close to the edge on the other side of the strip.

Trim the end of the almost made strop with pinking shears if you have them. If not, just trim with regular shears.

Cut your long strip in half to create...

....two 18" strips to use as the bag straps. We'll get back to how to attach these in a bit. For now, set them aside.

As I was finishing the other side, I decided to do this side in a modified Flying Geese pattern. For this, I needed 6 rows of 6 again, so I got to sewing.

I did two rows facing down and one row flying up.

This side was pressed and then...

...using my 2" denim strips, I put an edge on the design.

This is everything we've done thus far (except the pocket; that will come later).

Time to address the lining

I placed the bag front and back on the cutting pad and then spread out the lining fabric (pressed earlier) on top.

Using the rotary cutter, I evened out all edges and the bag was now approximately 17-1/2" square. Break time...on to the pocket.

This is a pocket off an old pair of blue jeans. If you are going to embellish your pocket (which will go inside the bag), now is the time. I decided to sew a diamond of the printed bag fabric to the pocket to give it some pop!

Place one piece of lining fabric face up on your work surface.

Measure approximately 2-1/2" from the top.

You can measure the width too, but I eye balled it and placed the pocket face up on the lining (wrong side of pocket on right side of lining).

Stitch from top of the pocket, to the top on the other edge, 3 edges in total, leaving the top open. I try to stitch in the stitch marks that are on the pocket already.

Stitch again on the second set of stitch marks. If there are no top stitching marks from the original stitching, still do a second line of stitching for strength.

Back to the lining and handle. You need to find the center of the top of the lining on both pieces. At the same time, we're going to measure our handle placement from that center line.

Fold the lining in half. Pin and clip the center. Pin and clip approximately 2-1/2" from the center while the fabric is still folded.

Unfold the lining fabrics and pin one of the handles on the snipped and pinned spot that was 2-1/2" from the center. The edges of each handle are now about 5" from each other.

Baste the handles in place using an approximately 1/8" seam.

Place one lining piece including handles face up.

Place the second lining piece right sides together on the first piece. The handle goes inside this fabric sandwich.

Pin the two facing pieces on three sides, leaving the top open. Begin stitching from the top of the bag to the bottom, across the bottom, and up to the top of the bag.

Do another row of stitching starting at the top and about 1/8" from first seam.

As you come close to the corner, start to ease your needle to the original stitching line and stitch over the first line to the corner.

Turn the corner with the second line still on the first and ease away from the seam line, back to 1/8" from the first line.

Bring the stitching line toward the corner again, using the first stitching line as your guide, come close at the corner, turn the corner, and come away from the original seam line gradually. The next few photos should help guide you with this.

You can see how I brought the second stitching line into the first in order to overlap stitches for trimming and turning in the next steps ahead.

When you have completed the seams on the lining, trim the corners at an angle so the corners will be crisp when we turn the lining at a late point in this process. Just wait!

Turn the lining you have just sewn so that the right side is facing out. Use your finger in the corner to push it out. You can use a corner tool, but since this is the lining, the crispness of the corner is not as important as it is for the bag itself.

Spread the lining out and look at what you've done. I like to hand press it at this point. You can take it to the iron and do it up proper, but this fabric is fairly pliable in my hands, so I didn't do that.

Clip the center on the bag top for matching later.

Repeat the instructions for sewing the side seams of the bag - right sides together, 1/4" on 3 sides, a second line of stitching next to that which merges to the point in the corners. Do not turn the bag right side out at this time.

Okay, here comes the fun part. Place the lining inside the bag, Right sides together.

It feels a little contrary to logic, but go with it. Push that lining into the bag. Right now, we're concerned with the top of the bag and keeping the handles inside the bag/lining sandwich.

Match the center clips on the top of the bag and lining. Pin into place.

Match the side seams of the lining with the side seams of the bag. Pin into place.

Continue pinning all the wary around the top, easing lining and bag to fit. Chances are, the measurements are not perfect and there will be a smidgen of an inch off here and there. You can usually stretch the fabric ever so slightly to make it fit.

Tricky part alert! Pick about a 3+" area to leave unsewn/open at the top. I mark my spot with a sideways pin to remind myself when I get to it.

Sew from one end of your opening to the other end of your opening at the top of the bag in a 3/4" seam.

Take a second seam between the top of the bag and the first seam, again leaving the opening for turning the bag unsewn.

Now for the really fun part - Turning the bag right side out. Remember that opening in the top where you didn't sew? Put your hand in there.

Begin by working on pulling the lining through the hole as the fabric is a bit thinner and easier to work with.

Keep tugging gently and don't give up. Grab the bag and start pulling it through the hole. It may take a bit, but all of the bag and lining will come through the hole and the bag will be right side out. It's not pretty work, but it does come into place. I promise.

Use this opporunity while your hand is inside between lining and bag to poke out the corners of the bag itself. The two corners on the bottom of the bag need a little work. Denim is tough and hard to make into a sharp corner, but if you sewed your seams correct and snipped off the excess fabric on the corners, you can push out a pretty nice angular corner.

This is what you have when you get the whole thing turned right side out. You can press or just use your hands to smooth it out.

Tuck the lining inside the bag and smooth everything out once again. Push, pull, tug, do what you need to even out seams, corners, and all that good stuff. Don't pull, push, or tug too hard. You don't want to tear your hard work into shreds.

In this photo, the scissors are pointing to the opening you left at the top of the bag. It needs to be addressed now.

Turn this unsewn bit into the bag lining as shown.

It's hard to see, but I pinned the opening closed.

Stitch all the way around the top edge twice - about 1/4" from the top and then again about halfway between that seam and the top edge. Be sure to catch the bag opening you pinned.

Smooth out your sewing around the top and look at what you made! Good job.

While you're at it, make a potholder with your leftover fabrics!

Sewing along, summer 2019

A lot of what I sew, I sew for me. The rest of it, I sew for others, either to sell or give away. That's the way it's been so far this summer. I've been thinking of Halloween and winter holidays. I go through my stash and see what moves me. And I end up with things like this:

Baby balls hand sewn using pentagons, then filled with fluff and in the center is a noisemaker that jingles ever so slightly when it's moved. Machine washable and one of a kind. I'm not doing hand sewing right now due to recovering from a quickie hand surgery, but I'll be back at it soon.  I posted about making the balls earlier. There are also instructions here and there on the internet for sewing with pentagons.

Along with balls, I made a couple of bibs with upcycled denim and bandanna fabric. I've made these in the past, saw a picture of one, and decided to try a couple more.  I think they're too cute for words. These two are a bit small and the next ones will be a little bigger and have Velcro closure instead of tie.

Trick or Treat bags are a fun way to use Halloween fabric. I have a lot of ribbons, fabrics, and trims and put a few together. 

There are more, but you get the idea. The last one was made completely of ribbons. When I was very young and very broke, I bought assortments of ribbons and make things out of them. This bag is a throwback to an earlier time. Never say never!

And, of course, my go-to sewing - pot holders, this batch for Halloween and Hannukah. All are backed with what started as a 9-patch denim square cut to the circle shape and filled with InsulBright. The bias binding is all homemade. It's just easier and less expensive to make my own than to try and match store bought bias tape.

I've also been cutting denim squares of several sizes to use and to sell, made placemats, have done some repair work on my own and others' items needing mending, and started a Cathedral Window project made of bandannas and denim.

And sew, I sew.

How 'bout you?

Summer sewing

It's getting really hot outside here in Virginia, and I'm spending a bit of time inside. Add to that the fact that I've officially retired, and you know how I'm going to spend that extra time - s e w i n g!

I think I'm done sewing baby balls for a while. I got into a potholder binge and have made several recently. Here's some of what I've been working on:

You can never make enough tote bags, right? And if you have a wedge ruler, it's fun to make a Dresden plate design. The cotton is from my stash of interesting calico type fabrics and the blue cotton edging the plate is a cotton faux denim that I also use for bias binding. 

A potholder using scraps of denim and some M&M fabric. I back my potholders with what started as a 9-patch recycled denim piece. I'm all about upcycling jeans, ya know.

 

 The front of these potholders is near and dear to me. I worked for years doing a hand pieced hexagon quilt top and then made another one! They came out to about twin bed sized, but we don't have a twin bed, so I made a decision to put the two together and make a larger coverlet/quilt with them. I ended up with some extra hexagon fabric, so I reinforced the pieces with zig-zag over the hand stitching, used the 9-patch denim back, and created some bias binding with the faux denim cotton. 

With all potholders I make, I use InsulBrite as the filling. It is not heat-proof, but it's about as heat-resistant as you can get. I also make the circles about 8-1/2" in diameter. The denim squares I use for the back start as 4" squares. I prefer round potholders because you can machine stitch one side of the binding and then hand stitch the other.

I also have made a doll quilt using M&M fabric triangles with denim triangles, and just yesterday, finished a lap blanket with patchwork and using fleece as the backing. I don't call it a quilt because there's no batting; the fleece serves a dual purpose of batting and backing, and it's super warm. 

Lastly, I'm working on my Cathedral Window quilt every day. I don't plan on finishing that for 5 years. 

Whew. What are y'all sewing?

Baby Balls Made with Pentagons (Tutorial in progress)

I'm newly obsessed with making balls for babies. I used to make them for my kids, but I used a sewing machine and now I'm hand sewing. The stitching is more precise with hand sewing and corners are tidier.

The method of sewing I'm using is English piecing. Basically, you have a paper pattern for the pentagon, the shape that is used for all pieces in the ball, for each piece of fabric. The fabric is basted onto the paper pattern, then the pieces are stitched together until there are 5 pentagons attached to the same central pentagon. When you have two sets of 6 total pentagons (the central one and the 5 attached to it), those two halves are attached to one another. (I'll add more about this as I construct the next one in line.) Leave open at least one seam so you can turn the ball right side out (this will make sense when I post pictures of construction), stuff it about halfway, add the sound maker (will add a photo of that too) in the center, and complete stuffing the ball. I stuff it tight, but not too tight; you want to leave enough play in the stuffing for baby's hand to be able to grab a part of it and maybe even shake it!

Color specific - brown

Black and white high contrast. 

Kid interest - Sponge Bob

I use a pentagon that I drafted. You can use pretty much any size bigger than 1". I would not go smaller than that. The side to measure is shown in the photo below. I use 2".

It's a pentagon (five sided) with each edge being 2". You can find pentagon patterns all over the internet or draw your own. There are 12 pentagons in each ball and they all have to be the same size.

I generally print off one page of templates and stack the printed page with some blank paper, then cut out a few at a time. That way I don't waste ink printing lots of pentagons. I like to cut through 4 pieces of paper at a time. Any more than that and the edges get a little off kilter. Remember, we're going to fold fabric directly on the paper pattern, so it's good to have it as precise as possible. 

After a few sessions of cutting, I have a bunch of pentagons ready to use when I'm ready to pick out some fabric and get going. 

The first step to sewing is to pin a pattern piece to a piece of fabric! I put down the paper and then cut at least 1/4" around the paper in order to have fabric to fold. Choose an interesting design to pin the paper to because that's what's going to show. 

Prepare a needle with a single thread that is in contrast to your fabric. Fold down an edge of fabric and take a couple stitches, fold down the next piece of fabric and take a stitch, and continue until you have all 5 sides basted down. I use a long basting stitch. You do not need to knot your thread. You'll be cutting the thread and taking the paper out later. For now, you want to fold all edges over the paper and baste each one down.

Here is one pentagon with the basting completed. You can see my red stitching in contrast to the white and black fabric. For each ball, baste fabric onto 12 paper pentagons.  

Here's a pretty simple tutorial on English piecing with hexagons. This one isn't mine, but I've made several hexagon projects using essentially the same instructions as I was taught them my a friend.  I'm not using hexagons, but the method of prepping the paper pattern is the same. They say it better than I can :) If for some reason you click and the site is no longer available, you can Google English piecing for several tutorials, including videos.

I'll update this post as I have photos of the steps required. It may take a while, but it'll happen!

Okay, this is what I'm working on - how about you?

Sewing machine and notion ads that make you think, sorta

Pinterest and Google searches come up with so many vintage sewing ads. Some make you laugh and some make you wonder. Others make you see how far people who sew have come. Here are a few that I thought you might enjoy.

I don't read the language, but I'm sure it means something fun. 

I guess if you wanted to get any sewing done in this woman's time, you needed to tie up your distraction. 

I'm not sure how I feel about this one's message. It sort of makes being a wife not a thing you'd want to be? 

Did you see the movie "Little Shop of Horrors," the one with Steve Martin as the dentist? This ad reminds me of Audrey singing "Somewhere That's Green." 

I thought this one was cute - catching a kiss over the wall and he has to stand on the machine table to reach his sweetie. 

This is a pretty standard advertisement, but I like the smile on her face and her perfect hair. 

Elna is one of the Cadillacs of sewing machines, but who knew it had a magic brain? 

And last, but not least, the cow spool holder. 

The look on the bovine's face says it all, don't you think? 

Feel free to let us know if you run across an ad that tickles your fancy.


Elna ad 
We found no attribution available for the other photos.
If any are yours, let me know and I'll credit you immediately.  

Hashtag Sewing and what's what

I haven't posted #sewing gems lately, so thought I'd bring you some today.

I agree! Moving a sewing machine is full of muscle building movement. Maybe we should move them around just for grins!

I responded to this one by reminding the Twitterverse that #Sewing is my cardio.

For me, it's all about the blouse making. More on that below.

Day Dreams Sewing had asked earlier what your favorite sewing machine was. I responded and she responded back. I mean it, too. If it dies, I'm getting another just like it!

Now, about that blouse. 

I've been working on a wearable art blouse in a block style for some time now. I've made blouses and boys/mens shirts galore over the years and never hesitated to get them done. There's something about this Kwik Sew pattern that has me stymied, though. The collar instructions are a little funky and the cuffs have me scared to proceed. I've never been this way with a pattern before! I need to get over myself and just finish the damned thing; it sits there cut and half constructed, taunting me. Maybe this is the week? Have you ever had a situation like this? Hard to believe I'm letting a lil ole pattern intimidate me!

On the other hand, I've finally adjusted a pattern to make myself pants that fit. It's amazing to not have the crotch hang down and the butt be baggy, and to have the rest of the pants fit right! Store-bought pants for women just don't have enough pocket space. My pants do! I adjusted the seat of the pants by taking the pattern up a bit; that way, the crotch fits front and back. I also adjusted the length ever so slightly to make up for the part I took up in the upper part of the pattern. Lastly, I took some of the width out of the legs to create a more modern style; they're not painted on, but they're also not super wide legged. Store-bought pants also sag and bag on me due to the shape of my body (long story short, abdomen!), and it's wonderful to have a pair of pants that fits. I have to nice pieces of denim to make jeans and have made a couple pair of these already. Who cares if they're all the same style? They fit like a glove. 

Sew on. It's that time of year when it's cooler and the machine makes one feel warm. 

In progress:

Cathedral Window quilt. 

Peter Max tote bags.

Slacks galore.

Tops with pieced inserts. 

Rock painting - hey wait, that's not sewing! My rock page on Pinterest.